Wireless Blips TT Shift Mounts.
This is the new improved version for the original “45 Degree TT Mounts” with better ergonomics, better looks, and a easier installation.
✓ Very strong clamping mechanism (Mounts can be used as fingerhooks).
✓ One size fits all – The clamping reach minimal 18mm up to 22mm internal.
✓ Only 25mm insertion depth in the bars is needed.
✓ Large button area – The whole top cover can be pressed to engage the wireless blips
✓ Mount is always 100% in the center of the handlebar – thanks to the 3 sided clamping mechanisme.
✓ The best possible aerodynamic design.
✓ Extremely lightweight at 23.7 gram for the 2 mounts only (39.3 gram including blips).
✓ Ergonomic design – without any sharp edges.
✓ Optional installation tools.
Tested during the Unbound XL race (9th place) and the Silk Road Mountain Race (1900km and 30.000m) . The mounts are strong enough to use during technical gravel rides.
The product is including:
- A set of 2 TT Shift Mounts (1 left and 1 right)
- Optional Wireless Blip tool and 2.5mm hex key
Sram AXS wireless Blips are NOT included. Click -> HERE <- to order them separately.
The TT mounts need 2 Wireless Blips (not included) for up and down shifting
The Wireless Blips can control all Sram wireless shifting components:
–✅ SRAM RED (XPLR) (ETAP) AXS Rear Derailleur
–✅ SRAM FORCE (XPLR) AXS Rear Derailleur
–✅ SRAM RIVAL (XPLR) ETAP AXS Rear Derailleur
–✅ SRAM APEX (XPLR) AXS Rear Derailleur
–✅ SRAM RED (ETAP) AXS Front Derailleur
–✅ SRAM FORCE AXS (WIDE) Front Derailleur
–✅ SRAM RIVAL ETAP AXS (WIDE) Front Derailleur
–✅ SRAM (XX / X0 / GX / S1000) (SL) EAGLE TRANSMISSION Derailleur
–✅ SRAM (XX1 / X01 / GX) EAGLE AXS Derailleur
–✅ Garmin / Wahoo / Hammerhead Cycle Computers
The wireless blips can NOT control:
-❌Rockshox Reverb AXS (XPLR) Dropper Post
-❌Rockshox Flight Attendant
- Fits on the end of a extension bar with a minimum internal diameter of 18mm (0,71″) and a maximum internal diameter of 22mm (0,87″).
- The kit comes with optional 2.5mm alan key.
- The set comes with 2 Wireless Blip Holders
- Fully 3d printed.
- Material: Industrial Carbon Filled Nylon (CF15)
- Print resolution: 0.08mm
Check out the pro teams that are riding with this product: Instagram
20 reviews for TT Shift – for Sram Wireless Blips